Cablesson Ivuna Flex 200mm IR Adapter Cable

Cablesson Ivuna Flex 200mm IR over HDMI Kit – Adpater / Cable is compatible with any HDMI equipped device and there is no need to install additional cabling, you can use your existing HDMI cable. You can even use the Cablesson Ivuna Flex 200mm IR over HDMI Kit – Adpater / Cable with other brands of HDMI Matrix, Switches and Splitters (Not to be used with a CAT5/6 Extenders). The setup is very easy. The package consists of 2 x Flex 200mm (Swivel and Rotate) Adapters / Cables that simply connect onto both ends of your HDMI cable run.
Once connected, the magic eye receiver dongle receives the remote control signals and sends them back down the HDMI cable to be blasted at the source by transmitter dongle.

The Cablesson Ivuna Flex 200mm IR over HDMI Kit – Adpater / Cable enables you to use your remote and control functions (such as pause, rewind etc.) even when the source devices are located in another room or even cupboard. Relay your remote control’s IR signal down a HDMI cable from HDTV locations where the HDMI source device is out of sight/range of the remote control.

High-definition picture that is displayed progressively. Each line is displayed on the screen simultaneously, therefore it is smoother than an interlaced picture. This is the ultimate high-definition standard — the most detailed picture, displayed progressively.

Note: Manufacturer HDMI link /CEC protocols such as Samsung Anynet Link, Sony Bravia Link, Panasonic Viera Link etc. will not function during IR over HDMI mode. CEC needs to be selected on the adapters to re-enable the shared manufacturer HDMI link functions. Compatible with most HDMI equipped devices (With IR Frequency between 33khz – 43khz Single Band (Single Band Emitter).

NOTE: This product works for all devices with an IR frequency in the 33-43 kHz range only (this excludes many cable boxes and AV systems using Dual band frequencies)